An amazing product that provides total control of sun, shade and light, as well as providing ventilation and total rain protection.

The beauty of the Eclipse lies in its simplicity and flexibility.  At the touch of a button, the aluminum louvers rotate through almost 180 degrees so that you can catch the sun, shield the wind or create shade as you like, before sealing shut for privacy and rain protection.

Versatility
The Eclipse can be built as a patio or commercial awning, as a roof for glassed or screened enclosures or to cover a swimming pool.  In manufacturing areas where fumes and heat are a problem the Eclipse provides the required ventilation.  The Eclipse Opening Roof may be installed flat, pitched, ort used vertically as a privacy screen.  The smooth flowing lines, together with a vast choice of colors and finishes, allows the Eclipse to blend brilliantly with any architectural style.

Heat Control
In winter the slim louvers of the Eclipse can be positioned to catch the sun's natural warmth into rooms to save on energy costs.  In summer these same louvers can then be moved to block direct sunlight to protect the building from unwanted solar heating.  Winter or summer - the Eclipse Opening Roof provides the best of both worlds.

Light Control
With the simple push of a button, the louvers can be moved to give the desired lighting level into a building.  This natural light illuminates work or living areas while providing savings in power consumption.  In an outdoor area the same push of a button allows you to control the light needed to create the right atmosphere. 

Ventilation
During the summer months a place is often sought that provides shade from the sun's heat as well as cool ventilation.  The Eclipse provides this by angling the louvers to a partially open position.  Even in light rain, the louvers can still be left partially open and the water will drain away in the contours of the louver.

Rain Protection
The Eclipse Opening Roof has a uniquely designed louver that provides complete overlap with no possibility of rain penetration.  Tests show that high pressure water would not penetrate the joints between the louvers.

Shade Control
the Eclipse provides the ultimate control over the amount of shade needed.  The amount of heat and light can be varied for work and relaxation.  For those with sensitive skin, or those concerned about health risks due to sun exposure, the Eclipse is the perfect answer - full light can be enjoyed without direct sunlight.

Control
The louvers rotate from sealed to shut to almost 180 degrees by use of a small 12 volt DC motor.  Safe to use and incredibly easy to operate, the motor is powered by either a solar charged battery or a transformer connected to 110 volt mains supply.  Multiple switches can be provided to allow control from different rooms or locations.  For special projects, control options can be designed to your requirements.

Construction
the Eclipse system is comprised of aluminum and 316 stainless steel components which have been designed to provide a high level of corrosion resistance.  The solid extruded aluminum louvers are powder coated for years of trouble-free service and come with a 5 year warranty.  The Eclipse system is installed with color matched guttering, downpipes and support structure of aluminum, steel or timber.

Tested and Approved
The Eclipse has been tested and certified for use throughout Australia and overseas including cyclone areas.  The aluminum louvers are manufactured to AS1866 and AS3902 and powder coated to AS3715

Metro/DC: 301-858-7447     Local: 410-768-8300     Toll-Free: 800-725-9501     Fax:  410-768-7931

© 2006-2008  P.G. Awning. All rights reserved.